Gondola Shelving with Plastic Risers and Dividers (Base + 3) - Silver (RAL9006)

The silver shallow low gondola shelving unit with plastic toothed risers and plain plastic dividers is perfect where product separation or binning is required. This shelving unit is in metallic silver, RAL9006 and is called a low gondola because it has 3 upper shelves, although it can be selected in any height.  All the upper shelves are supplied with two plastic toothed risers to fit along the front and back of the shelf and 4 x plastic dividers to divide the shelf from front to back.  The plastic shelf risers and dividers height is  75 mm above the shelf surface.  This silver shallow gondola racking comes with a 370 mm base shelf, 3 x 300 mm upper shelves each side, 12 x plastic risers and 24 x plastic dividers, a choice of coloured epos strips and two plinths. Configure the epos colour, shelving unit height and shelf length in the options below. SWSF® silver shop shelving is not only compatible with other 50 pitch shelving systems, in most cases it equals or exceeds them in quality and specification.

The silver medium gondola shelving unit with plastic risers and dividers is a double sided shop shelving unit, perfect where product separation is required on the shelves. All the upper shelves are adjustable in height and angle and supplied with two plastic toothed risers to fit along the front and back of the shelf and 4 x plastic dividers to divide the shelf from front to back.  The plastic risers and dividers stand 75 mm above the shelf surface.  This medium gondola comes with a 470 mm base shelf, 3 x 370 mm upper shelves each side, 12 x plastic risers and 24 x plastic dividers, a choice of coloured epos strips and two plinths. Configure the epos colour, shelving unit height and shelf length in the options below. SWSF® shop shelving is not only compatible with other 50 pitch shelving systems, in most cases it equals or exceeds them in quality and specification.

A gondola end of run leg consists of an upright and 2 base legs, every separate run of gondola shelving requires one end of run leg.  For example 1 standalone shelving bay requires 1 end of run leg, if you are joining 4 gondola shelving units together then you still only require 1 end of run leg for these 4 units, but if the 4 units were being split into 2 runs of 2 bays you would need 2 end of run legs.  Sometimes end of run legs are called finishers or finishing legs.  As all our shop shelving is designed to join together to create continuous runs of shelving each gondola shelving unit is supplied with 1 upright and 2 base legs, this is common practice with shop shelving, because if each gondola unit was supplied with 2 uprights and 4 base legs then there would usually be lots of parts left over.  If you need any help with deciding how many and what type of end of run legs you require, just give us a call (01752 829467) and we can help you. The gondola end of run legs in this section are silver (RAL9006) colour.